HPC Levelling for Fiat Ducato, Peugeot Boxer or Citroen Relay.

The HPC levelling system will level a motorhome in 90 seconds or less.

You have auto levelling functionality and user memory, so you can have your own setup, which is particularly useful if the motorhome is parked on your driveway, for example. There is also a tank setting for drainage of your waste tank, stabilise for quick levelling, and manual mode, which allows you to raise and lower the jacks in pairs on the front left, right, and rear. This can be done from the colour touchscreen located in the habitation area or from the mobile phone app available on Apple and Android mobile phones completely free of charge.

The HPC hydraulics is the only system manufactured from anodised aluminium. Its main benefit is that it is extremely lightweight, with the whole system weighing 55kg, including hydraulic oil and fittings for a complete 4-corner levelling system. This is one of the lightest hydraulic levelling system on the market.

The standard levelling systems can lift up to 12t. However, we also offer other systems for heavy-duty applications which can lift up to 32t.

The jacks are manufactured from anodised aluminium without paint, which makes them extremely corrosion-resistant. The stainless steel base plates are also encased in rubber for extra durability, making the system suitable for all environments, hence why they are installed all over the world in demanding climates.

HPC started manufacturing systems in 2004, and during that time, it became a worldwide market leader, supplying manufacturers such as Concorde, Frankia, Vario Mobil, and Morelo.

All HPC levelling systems are covered by a 3-year unlimited mileage warranty, including callouts anywhere in the UK and coverage in Europe.

Glide-Rite offers a service plan after the third year, which allows you to extend the warranty by an additional ten years, for a total of thirteen, provided the system is serviced annually after the third-year warranty expires. More details of this service plan can be obtained by emailing info@glide-rite.com. This warranty package is the best on the market and a testament to the quality associated with the HPC levelling system. 

We will only ever connect to the driver’s battery. The touchscreen and mobile phone app also provide live battery information about the voltage. One of the main benefits of the HPC levelling system is that the engine can be running whilst the jacks are being operated or just on ignition only.

A manual override for the hydraulic pump is included as standard if this was to happen.

Every customer consults with our technicians before we carry out the installation. We will find the best location for the pump and touchscreen, ideally in your habitation area, but we are open to bespoke locations based on the customer’s wishes.

Ideally, we also want to locate the hydraulic pump inside so access is straightforward if you are required to service the unit or operate the manual override, however, in situations where it is not possible to fit the hydraulic pump inside your vehicle, we can install it underneath the vehicle, but the pump will have to be housed in a waterproof box to protect it from the elements and there is an additional cost for this service.

Yes, if the levelling can’t be done automatically because you are on a site with a steep incline, the touchscreen will notify you that automatic levelling cannot be achieved and that you must switch to manual operation. In some cases, pads or blocks may be required to give extra lift.

For this situation, stackable pads are available directly from Glide-Rite. They are manufactured from nylon and designed to last a lifetime.

Yes, if you are going from an AL-KO chassis to another AL-KO chassis, for example, the transfer is extremely straightforward. If you are going from an AL-KO chassis to a different chassis altogether, transferring is still viable, but replacement mounting brackets and jacks may be required, depending on the vehicle. Either way, it is still considerably cheaper than buying a new system.

There is a handbrake overide as standard that will automatically retract the jacks if the ignition is turned on and the handbrake is released. If you did not mean to do this, unlike some other systems on the market, if you reinstate the handbrake, the jacks will automatically stop, and you can go back into the touchscreen and auto level.

There is also an LED light that illuminates when the jacks are deployed. When the light goes out, you are safe to drive the vehicle. The LED light is located on your dashboard, so it is visible from the driver’s seat at all times.

Yes, in manual mode, it is possible to lift all wheels off the ground to winterise the vehicle. The system will not drop during this time, and you can leave the vehicle in this position for as long as you like. It is also ideal for changing tyres or fitting snow chains.

This varies from vehicle to vehicle, but the average installation time is 12-15 hours.